PG Cable Ladder M Series From Middle Vertical Tees (PG to ISO 10346)
| Order Code | Stock Code | H mm | W mm | T mm | Weight (kg/mt) |
| AOT-10-M-04 PG | 01008AOT10M04PG | 40 | 100 | 1,2 | 0.375 |
| AOT-20-M-04 PG | 01008AOT20M04PG | 40 | 200 | 1,2 | 0.525 |
| AOT-30-M-04 PG | 01008AOT30M04PG | 40 | 300 | 1,2 | 1.375 |
| AOT-40-M-04 PG | 01008AOT40M04PG | 40 | 400 | 1,2 | 1.525 |
| AOT-50-M-04 PG | 01008AOT50M04PG | 40 | 500 | 1,2 | 2.375 |
| AOT-60-M-04 PG | 01008AOT60M04PG | 40 | 600 | 1,2 | 2.525 |
| AOT-10-M-05 PG | 01008AOT10M05PG | 50 | 100 | 1,2 | 0.425 |
| AOT-20-M-05 PG | 01008AOT20M05PG | 50 | 200 | 1,2 | 0.575 |
| AOT-30-M-05 PG | 01008AOT30M05PG | 50 | 300 | 1,2 | 1.425 |
| AOT-40-M-05 PG | 01008AOT40M05PG | 50 | 400 | 1,2 | 1.575 |
| AOT-50-M-05 PG | 01008AOT50M05PG | 50 | 500 | 1,2 | 2.425 |
| AOT-60-M-05 PG | 01008AOT60M05PG | 50 | 600 | 1,2 | 2.575 |
| AOT-10-M-06 PG | 01008AOT10M06PG | 60 | 100 | 1,2 | 0.475 |
| AOT-20-M-06 PG | 01008AOT20M06PG | 60 | 200 | 1,2 | 0.625 |
| AOT-30-M-06 PG | 01008AOT30M06PG | 60 | 300 | 1,2 | 1.475 |
| AOT-40-M-06 PG | 01008AOT40M06PG | 60 | 400 | 1,2 | 1.625 |
| AOT-50-M-06 PG | 01008AOT50M06PG | 60 | 500 | 1,2 | 2.475 |
| AOT-60-M-06 PG | 01008AOT60M06PG | 60 | 600 | 1,2 | 2.625 |
| AOT-10-M-07 PG | 01008AOT10M07PG | 70 | 100 | 1,2 | 0.525 |
| AOT-20-M-07 PG | 01008AOT20M07PG | 70 | 200 | 1,2 | 0.675 |
| AOT-30-M-07 PG | 01008AOT30M07PG | 70 | 300 | 1,2 | 1.525 |
| AOT-40-M-07 PG | 01008AOT40M07PG | 70 | 400 | 1,2 | 1.675 |
| AOT-50-M-07 PG | 01008AOT50M07PG | 70 | 500 | 1,2 | 2.525 |
| AOT-60-M-07 PG | 01008AOT60M07PG | 70 | 600 | 1,2 | 2.675 |
| AOT-10-M-10 PG | 01008AOT10M10PG | 100 | 100 | 1,2 | 0.575 |
| AOT-20-M-10 PG | 01008AOT20M10PG | 100 | 200 | 1,2 | 0.725 |
| AOT-30-M-10 PG | 01008AOT30M10PG | 100 | 300 | 1,2 | 1.575 |
| AOT-40-M-10 PG | 01008AOT40M10PG | 100 | 400 | 1,2 | 1.725 |
| AOT-50-M-10 PG | 01008AOT50M10PG | 100 | 500 | 1,2 | 2.575 |
| AOT-60-M-10 PG | 01008AOT60M10PG | 100 | 600 | 1,2 | 2.725 |
INFORMATION:
L: Length
T: Thickness
W: Width
PG: Pregalvanized
HDG: Hot Dip Galvanized
Material Thickness and Weight Tolerans: ± 10
DESCRIPTIONS:
1- “A ve B” Sizes Are Equal In Standard Production If Required
“B Sizes” Can Be Changed By Using Reducing Parts.
2- For other rediouses, please refer to page 240.
3- Different sheet thicknesses can be produced.
4- Please indicate order code and the Type of coating in your orders.