C Serisi Kablo Merdivenleri Ortadan T Elemanları (HDG TS EN ISO 1461)

Sipariş KoduStok KoduH mmW mmT mmAğırlık (kg/mt)
AOT-010-MHC-07 HDG01008010MHC07HDG701001.53,465
AOT-020-MHC-07 HDG01008020MHC07HDG702001.53,915
AOT-030-MHC-07 HDG01008030MHC07HDG703001.54,365
AOT-040-MHC-07 HDG01008040MHC07HDG704002.05,830
AOT-050-MHC-07 HDG01008050MHC07HDG705002.06,280
AOT-060-MHC-07 HDG01008060MHC07HDG706002.06,735
AOT-070-MHC-07 HDG01008070MHC07HDG707002.07,185
AOT-080-MHC-07 HDG01008080MHC07HDG708002.07,655
AOT-090-MHC-07 HDG01008090MHC07HDG709002.08,090
AOT-100-MHC-07 HDG01008100MHC07HDG7010002.08,540
AOT-010-MHC-10 HDG01008010MHC10HDG1001001.55,135
AOT-020-MHC-10 HDG01008020MHC10HDG1002001.55,505
AOT-030-MHC-10 HDG01008030MHC10HDG1003001.55,870
AOT-040-MHC-10 HDG01008040MHC10HDG1004002.08,315
AOT-050-MHC-10 HDG01008050MHC10HDG1005002.08,805
AOT-060-MHC-10 HDG01008060MHC10HDG1006002.09,295
AOT-070-MHC-10 HDG01008070MHC10HDG1007002.09,785
AOT-080-MHC-10 HDG01008080MHC10HDG1008002.010,310
AOT-090-MHC-10 HDG01008090MHC10HDG1009002.010,835
AOT-100-MHC-10 HDG01008100MHC10HDG10010002.011,360
AOT-020-MHC-12 HDG01008020MHC12HDG1252001.57,470
AOT-030-MHC-12 HDG01008030MHC12HDG1253001.57,960
AOT-040-MHC-12 HDG01008040MHC12HDG1254002.010,620
AOT-050-MHC-12 HDG01008050MHC12HDG1255002.011,110
AOT-060-MHC-12 HDG01008060MHC12HDG1256002.011,595
AOT-070-MHC-12 HDG01008070MHC12HDG1257002.012,050
AOT-080-MHC-12 HDG01008080MHC12HDG1258002.012,525
AOT-090-MHC-12 HDG01008090MHC12HDG1259002.013,105
AOT-100-MHC-12 HDG01008100MHC12HDG12510002.013,625
AOT-020-MHC-15 HDG01008020MHC15HDG1502001.57,470
AOT-030-MHC-15 HDG01008030MHC15HDG1503001.57,960
AOT-040-MHC-15 HDG01008040MHC15HDG1504002.010,620
AOT-050-MHC-15 HDG01008050MHC15HDG1505002.011,110
AOT-060-MHC-15 HDG01008060MHC15HDG1506002.011,595
AOT-070-MHC-15 HDG01008070MHC15HDG1507002.012,100
AOT-080-MHC-15 HDG01008080MHC15HDG1508002.012,625
AOT-090-MHC-15 HDG01008090MHC15HDG1509002.013,105
AOT-100-MHC-15 HDG01008100MHC15HDG15010002.014,225

AÇIKLAMALAR

1- Standart Şekilde “A ve B” Ölçüleri Eşit Olarak İmal Edilmektedir;

İsteğe Bağlı Olarak “ B Ölçüsü” Redüksiyon İle Değiştirilebilir. (bk. Sayfa 30)

2- Diğer Radiusler için bakınız sayfa 240.

3- Farklı sac kalınlıklarında üretim yapılabilmektedir.

4- Lütfen siparişlerinizde ürün kodu ve kaplama şeklini belirtiniz.

BİLGİLENDİRME:

L: Uzunluk

T: Kalınlık

W: Genișlik

PG: Pregalvaniz

HDG: Sıcak Daldırma

Malzeme Kalınlık ve Ağırlık Toleransı: % ± 10